Aristokraft LD425C - Manual (Page 59)

Copying from the Bypass Tray
37
2
When copying onto Custom Size Paper
Makes copies onto custom size paper from the bypass tray.
A
Open the bypass tray, and then align the paper guide to the paper size.
B
Insert the paper face-down until you hear the beep.
C
{q} key.
D
Press [Custom Size].
E
Enter the horizontal size of the original with the number keys, and then
press {q} .
F
Enter the vertical size of the original with the number keys, and then press
{q} .
G
Press [OK].
Note
❒ If you make a mistake in step E or F , press [Clear] or {Clear/Stop} key, and
then enter the value again.
❒ To register the custom size entered in step F , press [Program] and then
press [Exit] in the confirmation screen.