Changing the stamp position – Aristokraft LD425C User Manual
Page 142
Copying
120
2
Changing the stamp position
Changes the stamp position.
A
Press [Change] under < Stamp Position >.
B
Select the desired position, and then press [OK].
Specifying the first printing page and start number (“P1,P2...”, “-1-,-2-...”, “P.1,P.2...”,
“1,2...”)
Below explains the example when “P1, P2 …” is selected. The steps are the same
for other cases.
A
Press [Change] under
B
Press [First Printing Page], enter the original sheet number from which to start
printing from, and then press the {q} key.