Aristokraft LD425C - Manual (Page 45)

Placing Originals
23
1
Custom sizes
When placing custom size originals in the ADF, specify the size of the originals.
Important
❒ Paper that has a vertical length of 128–297 mm (5.1”-11.6”) and a horizontal
length of 128–432 mm (5.1”-17”) can be placed with this function.
A
Press [Special Original].
B
Press [Original Size].
C
Press [Custom Size].
D
Enter the horizontal size of the original with the number keys, and then
press {q} key.
E
Enter the vertical size of the original with the number keys, and then press
{q} key.
F
Press [OK].
G
Place the originals, and then press the {Start} key.
Note
❒ If you make a mistake in step D or E , press [Clear] or {Clear/Stop} in step D ,
and then enter the value again.