Aristokraft LD425C - Manual (Page 124)

Copying
102
2
E
Set an erase border width with [n] or [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.1 inch).
Pressing and holding down the relevant key changes the width in increments
of 10 mm (0.4 inch).
F
Press [OK] twice.
G
Place your originals, and then press the {Start} key.
Note
❒ To change the value entered in step E , press [n] and [o] to set a new val-
ue.
Border Erase (different width)
This mode erases the edge margin of the original image.
A
Press [Edit / Color].
B
Press [Erase].
C
Press [Erase Center / Border].
D
Press [Different Width ].