E-Mon E20-6003200J-D-KIT - Manual (Page 3)

CLASS 2000 METER
3 62-0389-05
TABLE OF CONTENTS
Section 1.0 Pre-Installation Information 4
Section 2.0 Safety Label Definitions and Information 6
Section 3.0 Precautionary and Safety Information 7
Section 4.0 Meter Installation 8
Section 4.1 Mounting the Meter 8
Section 4.2 Main Power Board Connections 8
Section 4.3 Current Sensor Installation & Wiring 11
Section 4.4 MAINS Line Voltage & Current Sensor Wiring
Diagrams
14
Section 4.5 Installation Overview 15
Section 4.6 Check Polarity of the Current Sensor 15
Section 5.0 Monitoring Multiple Loads with One Meter 19
Section 6.0 KWh Meter Features & Functions 21
Section 6.1 KWh Meter Display Features 21
Section 6.2 How to Read the kWh Meter 22
Section 6.3 KWh Meter Hardware Functions 23
Section 6.4 Class 1000 and Class 2000 Pulse Output Removable
Two-Screw Terminal Plug
24
Section 7.0 KWh/Demand Meter Features & Functions* 26
Section 7.1 KWh/Demand Meter Display Functions 26
Section 7.2 How to Read the kWh/Demand Meter 27
Section 7.3 Demand Display Set-Up 28
Section 7.4 Demand Reset 30
Section 7.5 Test Mode 32
Section 8.0 Preventative/Scheduled Maintenance 34
Section 9.0 Lithium Battery Replacement Instructions 35
Section 10.0 Troubleshooting Guide 37
Section 10.1 Line Voltage Diagnostics 38
Section 11.0 High Voltage Metering 41
Section 12.0 Frequently Asked Questions 44
Section 13.0 Meter Technical Specifications 46
Section 14.0 Meter Limited Warranty 49
* Applies to meters equipped with the Demand option.