Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 62)

Operation PEM-9004
Teledyne Analytical Instruments 50
The time will be displayed in the top left corner of the status line if
not replaced by an alert or other superimposed information.
Time and date will be saved together with the corresponding data
and will appear on any print-outs of the measured data.
Note: The time value will not automatically adjust for daylight
savings changes but the date value will account for leap
years.
To set the time:
•
Press F1 from the Time-Date screen. The following screen
will appear:
•
Use the arrow keys to select the desired digit.