Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 33)

Portable Emissions Analyzer Operation
Teledyne Analytical Instruments 21
4.4 Configure Menu
The Configure menu is used to set up the analyzer for your specific
process. From this screen you can:
•
Change the display order so that the information on the screen
is in a convenient sequence.
•
Select a specific fuel from a list or add a new fuel to the list.
•
Change the general settings of the instrument.
•
Return to the default configuration of the instrument.
To enter the Configure menu press the F2 key from the Main menu.
The following screen appears:
4.4.1 Display
The sequence of the measured or calculated parameters can be
repositioned in any way to suit your preference. This is accomplished
from the Display screen. To rearrange the measurement screen:
•
From the Configuration menu press F1 to bring up the Display
screen. The following screen appears: