Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 41)

Portable Emissions Analyzer Operation
Teledyne Analytical Instruments 29
•
Use the arrow keys to increase or decrease the interval. Press
ENTER to save the setting or CLEAR to cancel the input.
Note: The Illum Off interval can be set from 0 to a maximum of
30 seconds in one second intervals.
The automatic illumination off feature is disabled if an
interval is set to 0 seconds.
4.4.4 Set Default
The Set Default function is used to return the instrument to the
initial factory programmed settings.
CAUTION: RESTORING THE INSTRUMENT TO FACTORY
DEFAULT SETTINGS WILL RESULT IN THE LOSS OF
ALL INDIVIDUAL SETTINGS AND CANNOT BE
UNDONE EXCEPT BY REENTERING THE USER
SETTINGS! THE DATA MEMORY IS NOT AFFECTED.
To restore the instrument to the default settings:
•
Press ENTER from the Configuration Main menu. The
following screen will appear:
•
Confirm the restoration operation by pressing ENTER or
cancel the request by pressing CLEAR.