Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 50)

Operation PEM-9004
Teledyne Analytical Instruments 38
Pressing F2 from the Extended Data menu displays the Oil Derivates
Input screen. In this screen there is a choice between "Yes" (oil derivatives
exist) and "No" (no oil derivatives exist).
•
Press F1 if oil derivatives are present.
•
Press F3 if oil derivatives are not present.
•
Press ENTER to save the result or CLEAR to cancel the
operation.
Temperature and heat carrier
Pressing F3 from the Extended Data menu displays the Boiler
Temperature screen. In this screen, the measured temperature can be
entered through the editor.
•
Use the arrow keys to select the desired digit.
•
Press OK to confirm the selection.
•
Press ENTER to save the entered temperature or CLEAR to
cancel the operation.