Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 34)

Operation PEM-9004
Teledyne Analytical Instruments 22
•
Use the arrow keys to move the underline cursor to the line
you want to move. Then press OK to activate the line for
repositioning.
•
Move the selected line up or down using the arrow keys.
When it is in the chosen position, press OK. The following
screen shows the CO measurement line repositioned to the
second line from the top.
•
Press ENTER to save the setting or CLEAR to cancel the
move.
Note: The same line cannot be displayed more than once.