Teledyne PEM-9004 - Portable emissions analyzer - Manual (Page 57)

Portable Emissions Analyzer Operation
Teledyne Analytical Instruments 45
The PEM-9004 is capable of multi-tasking so the analyzer can be
taking measurements, performing calculations, etc during the printing
procedure. Printing takes place simultaneously in the background as
other analyzer operations are being performed.
To print a screen, press the Print button from the Flue Gas menu.
4.5.2 Temperature
The temperature program can be started by pressing F1 from the
Measurement screen.
The PEM-9004 supplies two temperature measurement channels
(T1 and T2). Measurement channel T1 is displayed with a resolution of
0.1°C whereas channel T2 has a resolution of 1°C.
The Temperature screen is shown below:
Available functions from within the temperature program are:
Hold: Freezes the current temperature readings.
Max/Min Reset: Resets the current temperature readings.
Print: Prints out the currently displayed temperature
screen
Cycle button: Change units (°C or °F).