Teledyne 3010TAC - Split architecture trace oxygen analyzer (EU - CENELEC) - Manual (Page 75)

Oxygen Analyzer Part II: Analysis Unit
Part II: 3-5 Teledyne Analytical Instruments
40 Calibration Contact
41 Calibration Contact
42 Alarm 2 NC Contact
43 Alarm 2 NO Contact
44 Alarm 2 C Contact
45 Alarm 1 NC Contact
46 Alarm 1 NO Contact
48 Exhaust Solenoid Return
49 Zero Solenoid
50 Sample Solenoid Return
3.5 Remote Probe Connection
The Models 3010TAC are split architecture (dual-chassis) instru-
ments, which have a Remote Probe, or Analysis Unit. The remote probe is
for receiving the oxygen sensor and thermistor signals.
Remote Probe 9-pin Connector
Figure 3-: Remote Probe Interface Pinout
8
5
6
1
Sensor Hot
Sensor Return
Thermistor Return
Thermistor Hot