Teledyne 3010PAC - Split architecture percent oxygen analyzer (EU - CENELEC) - Manual (Page 79)

Appendix: A-3
Oxygen Analyzers Appendix
Teledyne Analytical Instruments
Appendix
A-1 Model 3010PAC Specifications
Packaging: General Purpose Control Unit
• Flush panel mount (Standard).
• Rack mount — Relay rack mounted to
contain either one or two instruments in one
19" relay rack mountable plate (Optional).
Sensor: B-1 Micro-Fuel Cell (standard); others avail-
able.
Cell Block: Nylon (316 stainless steel available).
Ranges: Three user definable ranges 0-1 % to 0-100 %.
Air calibration range 0-25 %.
Autoranging with range ID output.
Sample System: Positive pressure service.
Vacuum service (optional).
Auto Cal / Auto Zero. Electrically operated
valves signals available.
Alarms: One system-failure alarm-contact to detect
power failure.
Two adjustable concentration threshold alarms
with fully programmable setpoints.
Diagnostics: Start-up or on-demand, comprehensive, self
testing function initiated by keyboard.
Displays: 2 line by 20 alphanumeric, VFD screen, and
one 5 digit LED display. Flowmeter on
Analysis Unit.
Digital Interface: Full duplex RS-232 communications port.