Teledyne 3010PAC - Split architecture percent oxygen analyzer (EU - CENELEC) - Manual (Page 25)

Oxygen Analyzer Part I: Control Unit
Part I: 3-3 Teledyne Analytical Instruments
is pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide), such as a small hex wrench or screwdriver Allow clearance for the
door to open in a 90-degree arc of radius 7.625 inches. See Figure 3-3.
Figure 3-3: Required Front Door Clearance
3.3 Electrical Connections
Figure 3-4 shows the Control Unit rear panel. Connections for power,
communications, and both digital and analog signal outputs are described
in the following paragraphs. Wire size and maximum length data appear in
the Drawings in the back of this manual.
Figure 3-4: Rear Panel of the Model 3010PAC Control Unit
For safe connections, no uninsulated wiring should be able to come in
contact with fingers, tools or clothing during normal operation.