Teledyne 3000TB-XL - Trace oxygen analyzer User Manual
Page 47
Trace Oxygen Analyzer
Operation 4
4-7
Teledyne Analytical Instruments
Press
System
to enter the
System
mode.
TRAK/HLD Auto—Cal
PSWD Logout More
Use the < > arrow keys to scroll the blinking over to
PSWD
, and press
Enter
to select the password function. Either the default TETAI password or
AAAAA place holders for an existing password will appear on screen
depending on whether or not a password has been previously installed.
T E T A I
Enter PWD
or
A A A A A
Enter PWD
The screen prompts you to enter the current password. If you are not
using password protection, press
Enter
to accept TETAI as the default
password. If a password has been previously installed, enter the password
using the < > arrow keys to scroll back and forth between letters, and the
ΔΔΔΔΔ∇
arrow keys to change the letters to the proper password. Press
Enter
to enter
the password.
If the password is accepted, the screen will indicate that the password
restrictions have been removed and you have clearance to proceed.
PSWD Restrictions
Removed
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Change Password?
Press
Escape
to move on, or proceed as in Changing the Password,
below.
4.3.3.2
Installing or Changing the Password
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the oppor-
tunity to change the password:
Change Password?