PASCO AP-8214A Stress_Strain Apparatus - Manual (Page 2)

®
S t r e s s / S t r a i n A p p a r a t u s 0 1 2 -1 3 2 8 2A I n tr o d u c t i o n
2
AP-8223 Metal Test Coupons: 5 samples, 10 pieces
per sample (sample containers labeled with
thickness in inches)
• cold-rolled steel 0.003”
• annealed steel 0.003”
• aluminum 0.003”
• brass (thick) 0.005”
• brass (thin) 0.003”
Note: The metal coupons are packaged in plastic containers to prevent bending or creasing of the coupons.
*The AP-8217A Replacement Test Coupons include all of the AP-8222 plastic and AP-8223 metal test coupons.
Introduction
The PASCO AP-8214A Stress/Strain Apparatus illustrates the relationship between stress and strain for various mate-
rials. The apparatus stretches a test coupon (and breaks it in some cases) while measuring the amount of stretch and
force experienced by the test coupon. Data acquisition software can be used to generate a plot of force versus dis-
placement and also a plot of stress versus strain.
The Stress/Strain Apparatus requires a ScienceWorkshop or PASPORT interface, DataStudio software, a Rotary
Motion Sensor (RMS), and a Force Sensor. Included with the apparatus are four types of metal test coupons and four
types of plastic test coupons. Also included are a tee handle with a socket that fits the hex nuts on the coupon clamps,
a bar for calibrating the apparatus, and spare hex nuts for the coupon clamps.
This manual includes instructions for setting up the Stress/Strain Apparatus with ScienceWorkshop or PASPORT sen-
sors. It also describes how to do the calibration and the data collection using the DataStudio set-up files that are on the
included PASCO Experiment Setup CD-ROM. The CD-ROM has a folder labeled “AP-8214 SETUP” that contains
two DataStudio configuration (set-up) files, two DataStudio workbook files, and a sample data file.
Additional Equipment Required for Use with
ScienceWorkshop Sensors
Part Number
ScienceWorkshop Interface See PASCO catalog or www.pasco.com
DataStudio
1
1 DataStudio 1.8 or later recommended. Visit www.pasco.com to download the latest version. DataStudio Lite, the free version, is
sufficient for use with the experiment set-up files on the included CD.
See PASCO catalog or www.pasco.com
Economy Force Sensor CI-6746
Rotary Motion Sensor CI-6538
Additional Equipment Required for Use with
PASPORT Sensors
Part Number
PASPORT Interface
2
2
The two sensors used on the Apparatus require a single multi-port interface such as the Xplorer GLX (PS-2002) or PowerLink
(PS-2001), or two single-port interfaces such as the USB Link (PS-2100) or Xplorer (PS-2000).
See PASCO catalog or www.pasco.com
DataStudio
1
See PASCO catalog or www.pasco.com
Force Sensor PS-2104
Rotary Motion Sensor PS-2120
Recommended Equipment Part Number
Replacement Test Coupons* AP-8217A
Digital Calipers SE-8710
Fig. 3: AP-8223 Metal Test Coupons