PASCO UI-5000 850 Universal Interface Instruction Manual - Manual (Page 15)

® ®
UI-5000 850 Universal Interface
012-12355A 15
• The Bidirectional Sweep Type starts at the Initial Frequency, moves to the Final
Frequency, and returns to the Initial Frequency – repeatedly – while the Signal Generator
output is on.
• NOTE: The Initial Frequency can be lower or higher than the Final Frequency.
C. Signal Generator Controls: 850 Outputs 2 and 3
In the Capstone Signal Generator panel, click the
850 Output 2 drop down menu.
The Signal Generator 850 Output 2 panel shows the
following controls:
Please see the online PASCO Capstone User’s Guide for detailed information about these
Signal Generator functions.
• Waveform. Sine (default), Square, Triangle, Positive Ramp, Negative Ramp, and DC.
• Sweep Type: Off (default), Single, Repeat, Bidirectional
• Frequency: Default: 1000 Hz; Range: 0.001 to 500 kilohertz for AC waveforms
• Amplitude: Default: 1 V; Range: 0 to 10 V, depending on Voltage Limit.
• Voltage Limit: Default: 10 V. Range: 0 to 10 V.
• On, Off, Auto: On starts the Signal Generator whether or not the Interface is recording
data; Off (default) stops the Signal Generator; and Auto starts and stops the Signal
Generator when the Interface starts and stops recording data.
NOTE: Output 2 and Output 3 differ from Output 1 in the Frequency and the Amplitude range.
Outputs 2 and 3 do not have the Voltage Offset and Current Limit controls. Also, the current
output is limited to 50 milliampere (mA). Otherwise, Output 2 and Output 3 operate the same
way as Output 1.
Cables
Output 2 and Output 3 have BNC ports. You can connect the BNC plug of the UI-5119 BNC-to-
Shrouded Banana Plug Cord or the UI-5219 BNC-to-Banana Plug Cord to either output port.
You can connect the banana plugs to the circuit or other device.
Please see the online PASCO Capstone User’s Guide for detailed information about the Signal
Generator panel and the features of the other Controls, Displays, and Tools.
Waveform Amplitude
Sweep Type Voltage Limit
Frequency On, Off, Auto
850 Output 2 panel