NetMedia iViewHD-2M - Manual (Page 27)

Admin Web Page
The Admin Web page provides several options which help you manage iViewHD. You can control the
Link LED and force iViewHD to restart (reboot) or to have iViewHD set itself into a factory default
configuration.
Set LED Brightness
You can control the brightness level of the Link LED.
• LED Brightness - specifies the LED brightness level. You can set a level from 0 to 255. A level
of 0 turns off the LED and a level of 255 sets the LED brightness to its maximum. The default
value is 255.
Press “Set LED Brightness” to change the brightness level. The brightness level will change immedi-
ately without iViewHD restarting.
Blink LED
You can force the Link LED to blink for a period of time and at a certain rate. This is useful if you have
several iViewHDs and you wish to know which iViewHD you are controlling via the web interface.
Once the LED finishes blinking it will revert to its original functionality.
• Blink time - specifies the amount of time the LED will blink in seconds. You can specify a value
of 0 to 255.
• Blink rate - specifies how fast the LED will blink. You can enter a value of 0 to 7. 0 is the slowest
blink rate and 7 is the fastest.
iViewHD Userʼs Manual
© 2009 NetMedia, Inc. 27