beautypg.com

NetMedia VIDCAM-DW User Manual

Nm-vidcam, Security video camera, Features

background image

NM-VIDC

AM

MAN-VIDCAM REV1002A

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Security Video Camera

NM-VIDCAM

Indoor/Outdoor Weather Resistant

Elbow Bracket

Adjusts camera angle at base,
screw, and housing. Installs in
1/2” junction box covers.

Camera Lens

Comes prefocused from

factory but can be adjusted

by rotating in either direction.

Camera Bracket

Slot indicates image bottom;

rotate to adjust camera.

Base, Gasket & Screws

Mount to round 4” junction box.

Video Connector

Female BNC connector.

Power Connector

12V DC 300mA, center positive.

Excellent image quality
Tough billet aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Accepts photo lens accessories
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty

Camera Lens:

Image Sensor:

Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:

Power Requirement:
Power Connector:

External Accessory Threads:

Housing Size:

Base Size:

Mounting Holes:

Weight:

FEATURES

Housing Cap

Externally threaded to accept

37mm lenses and accessories.

Locking Ring

Secures elbow bracket to
base at desired position.

Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, Video Connector, Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting hardware (Mounting Screws, Grounding Strap, Screw and
Compression Ring).

This general purpose security camera mounts to a typical round 4 inch junction box and is viewed with a security monitor.
Other junction boxes from your local hardware store may also be used after replacing the round base with another that has
a 1/2 inch diameter hole for the elbow bracket. To view the camera on a single standard television, use the TV’s composite
RCA Video Input jack.

Female BNC, 75 Ohm

12V DC, 300mA

5.5mm OD, 2.1mm ID, center positive

37mm x .75 pitch

3.13“ dia., 4” long

4.5” dia., 0.75” high, 0.5“ hole

3.5” centers

1 lb.

(subject to change without notice)

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

540 lines

72˚ Horizontal

0.1/0 Lux

Yes

Day/Night Color

SPECIFICATIONS

Color

Day/Night Color

Color

Housing

Available in UV Paintable White:

Color camera Day/Night Color Housing

NM-VIDCAM-CW

White

NM-VIDCAM-DW