NetMedia UTPCAM-DW - Manual

NM-UTPC
AM
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
UTP Security Camera NM-UTPCAM
Indoor/Outdoor Weather Resistant
MAN-UTPCAM REV1103A
Elbow Bracket
Adjusts camera angle at base,
screw, and housing.
Camera Lens
Factory set - rotates in either
direction to adjust focus.
Camera Bracket
Slot indicates image bottom.
Base, Gasket & Screws
Mount to round 4” junction box.
UTP Jack
Female RJ-45 connector transmits
both power and video across CAT5
and other UTP cable types.
UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Accepts photo lens accessories
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty
Housing Cap
Externally threaded - accepts
37mm lenses and accessories.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, UTP Video Encoder, UTP Jack).
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
This Day/Night Color IR sensitive surveillance camera utilizes a built-in NetMedia UTP Video Encoder and external UTP
Video Decoder to exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to
run multiple cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security
monitor or television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.
Housing adjusts horizon
180˚ in either direction.
UTP Video Encoder
Built into camera - exchanges
power and video with Decoder for
One Wire Video™ on UTP cable.
Day/Night Color
Housing
White NM-UTPCAM-DW
Available in UV Paintable White:
Day/Night Color Housing
Power Input
Connects to 24V DC wall
transformer (included)
and AC outlet.
UTP Jack
Connects to Camera UTP
Jack via straight-through
wired UTP cable (T-568A).
Red LED
Indicates Power.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
UTP Video Decoder
FEATURES
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector:
UTP Decoder Size:
UTP Decoder Weight:
External Accessory Threads:
Housing Size:
Base Size:
Base Mounting Holes:
Assembly Weight:
Female RJ-45 jack
UTP: CAT5 or better
Up to 1000’
Proprietary
Composite
Female RCA
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2” long, 2.2” wide, 0.9” thick
3 oz.
37mm x .75 pitch
2.13” dia. x 4” long
4.5“ dia., 0.75” high, 0.5“ hole
3.5” centers
14 oz.
(subject to change without notice)
3.6mm
1/3” CCD
540 lines
72˚ Horizontal
0.1 Lux
Yes
SPECIFICATIONS
Day/Night Color