NetMedia VIDLAMP-HIR - Manual

NM-VIDL
AMP-HIR
MAN-VIDLAMP-HIR REV0707A
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Security Camera w/IR
NM-VIDLAMP-HIR
(SCE3-IR)
Indoor/Outdoor Weather Resistant
Day/Night Color w/IR LED’s
Elbow Bracket
Adjusts camera angle at base,
screw, and housing. Installs in
1/2” junction box covers.
Camera Lens
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Infrared LED’s
940nm IR illuminators
provide invisible light for
camera without red glow.
Housing
Available in Ivory only:
Model Camera Type
Gasket, Base & Screws
Mount to round 4” junction box.
Video Connector
Female BNC connector.
Power Connector
12V DC 300mA, center positive.
Excellent image quality
Sees in complete darkness
No visible red glow
IR LED’s turn on/off automatically
Tough aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Infrared Illuminators:
Output Connector:
Power Requirement:
Power Connector:
Housing Size:
Base Size:
Mounting Holes:
Weight:
28 - 940nm IR LED’s
Female BNC, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
3.13“ dia., 4” long
4.5” dia., 0.75” high, 0.5“ hole
3.5” centers
1 lb.
(subject to change without notice)
FEATURES SPECIFICATIONS
Light Sensor
Automatically turns LED’s on
and off according to light level.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Camera Assembly (Camera, IR LED’s, Light Sensor, Housing, Housing Cap,
Elbow Bracket, Locking Ring, Base, Gasket, Video Connector, Power Connector).
2. 12V DC 300mA Power Transformer (Center Conductor Positive).
3. Mounting hardware (Mounting Screws, Grounding
Strap, Screw and Compression Ring).
The NetMedia VIDLAMP-HIR (SCE3-IR) is a day/night color security camera with built-in infrared (IR) LED’s that mounts to a
typical round 4 inch junction box and is viewed with a security monitor. IR illumination provides invisible light for the camera
in complete darkness. Other base plates with a 1/2 inch diameter hole for the elbow bracket may be used instead. To view the
camera on a single standard television, use the TV’s composite RCA Video Input jack.
(SCE3-IR) NM-VIDLAMP-HIR Day/Night Color
3.6mm
1/3” CCD
580 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
Housing Cap
Remove to rotate camera
bracket or to adjust focus.
Day/Night Color