Info web page, Iviewhd userʼs manual – NetMedia iViewHD-2M User Manual

Page 19

Info Web Page

The Info web page gives a quick overview of some of iViewHDʼs settings:

• Device Name - shows the name of the iViewHD camera. This name is directly translatable to a

Bonjour name which allows the camera to be located on the network.

• Website Version - shows the current version of the website that is loaded into the iViewHD

camera. You can load new website firmware using the Update page.

• Firmware Version - shows the current Firmware version number. You can load new Firmware

using the Update page.

• Hardware Version - shows the hardware version of the iViewHD camera. iViewHD-2M repre-

sents a 2 megapixel camera; iViewHD-D1 represents a D1 camera.

• Ethernet MAC Address - shows iViewHDʼs Ethernet MAC address. Each iViewHD has a unique

MAC address.

• Free Space Remaining - shows how much free space is remaining in iViewHDs persistent

(flash)storage. iViewHD stores configuration parameters in persistent storage. If persistent stor-
age space is exhausted, you will need to reset iViewHD back to factory defaults to reclaim the
space.

• DHCP Address - shows your current DHCP address. A value of 0.0.0.0 means that a DHCP ad-

dress has not been obtained either because iViewHD was recently rebooted and has not re-
quested a DHCP address yet, the DHCP server may not have allocated one or DHCP was dis-
abled.

• Link Local IP Address - shows your current link local (LL) address. Each iViewHD automati-

cally generates its own LL address which is unique on the local network. LL addresses are not
routable and thus cannot be accessed outside of the local network. If you need a routable ad-
dress, you should use a DHCP or Static IP address.

iViewHD Userʼs Manual

This manual is related to the following products:

iViewHD-D1