NetMedia POCLAMP-DI User Manual
Nm-poclamp, Power over coax camera, Features
NM-POCL
AMP
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Power over Coax Camera
NM-POCLAMP
Indoor/Outdoor Weather Resistant
MAN-POCLAMP REV1002A
Elbow Bracket
Adjusts camera angle at base,
screw, and housing.
Camera Lens
Factory set - rotates in either
direction to adjust focus.
Camera Bracket
Slot indicates image bottom.
Base, Gasket & Screws
Mount to round 4” junction box.
F-Connector
Transmits both power and video
across a single coax.
Housing Cap
Provides access to camera.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, PoC Video Encoder, F-Connector).
2. NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
PoC Video Encoder
Built into camera - exchanges
power and video with Decoder for
One Wire Video™ on coax cable.
Housing
NM-POCLAMP-CI
Ivory
NM-POCLAMP-DI
Available in Ivory Color Only:
Color camera Day/Night Color Housing
Color
Day/Night Color
Power Input
Connects to 24V DC wall
transformer (included)
and AC outlet.
F-Connector
Connects to camera
F-Connector with a single
coax such as RG6.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
PoC Video Decoder (Included)
This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external
PoC Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple
cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security monitor or
television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.
PoC Video Encoder built into camera
Includes PoC Video Decoder module
One Wire Video™ Installation
Uses one coax cable to camera
Excellent image quality
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty
FEATURES
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector:
PoC Decoder Size:
PoC Decoder Weight:
Housing Size:
Base Size:
Base Mounting Holes:
Assembly Weight:
Female F-Connector
Coax: RG6 quad shield recommended
Up to 100’
Proprietary
Composite
Female RCA
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2” long, 2.2” wide, 0.9” thick
3 oz.
3.13” dia. x 4” long
4.5“ dia., 0.75” high, 0.5“ hole
3.5” centers
1 lb.
(subject to change without notice)
SPECIFICATIONS
Color
Day/Night Color
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
3.6mm
1/3” CCD
540 lines
72˚ Horizontal
0.1/0 Lux
Yes
MAN-POCLAMP REV0905A
MAN-POCLAMP REV0905A