NetMedia VIDLAMP-DI User Manual
Nm-vidlamp, Security video camera, Features specifications
NM-VIDL
AMP
MAN-VIDLAMP REV1003A
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Security Video Camera
NM-VIDLAMP
Color
Indoor/Outdoor Weather Resistant
Day/Night
Color
Elbow Bracket
Adjusts camera angle at base,
screw, and housing. Installs in
1/2” junction box covers.
Camera Lens
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Camera Bracket
Slot indicates image bottom;
rotate to adjust camera.
Housing
Available in Ivory only:
Model Camera Type
Base, Gasket & Screws
Mount to round 4” junction box.
Video Connector
Female BNC connector.
Power Connector
12V DC 300mA, center positive.
Excellent image quality
Tough aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:
Power Requirement:
Power Connector:
Housing Size:
Base Size:
Mounting Holes:
Weight:
Female BNC, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
3.13“ dia., 4” long
4.5” dia., 0.75” high, 0.5“ hole
3.5” centers
1 lb.
(subject to change without notice)
FEATURES
SPECIFICATIONS
Color
Housing Cap
Remove to rotate camera
bracket or to adjust focus.
Locking Ring
Secures elbow bracket to
base at desired position.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, Video Connector; Power Connector).
2. 12V DC 300mA Power Transformer (Center Conductor Positive).
3. Mounting hardware (Mounting Screws, Grounding
Strap, Screw and Compression Ring).
The NetMedia VIDLAMP security cameras mount to a typical round 4 inch junction box and are viewed with a security
monitor. Other junction boxes from your local hardware store may also be used after replacing the round base with another
that has a 1/2 inch diameter hole for the elbow bracket. To view the cameras on a single standard television, use the TV’s
composite RCA Video Input jack.
3.7mm
1/4” CCD
470 lines
54˚ Horizontal
0.5 Lux F1.2
No
NM-VIDLAMP-CI
NM-VIDLAMP-DI
Color
Day/Night Color
Day/Night Color
3.6mm
1/3” CCD
540 lines
72˚ Horizontal
0.1 Lux
Yes