DYNAPACE Transfer Conveyor - Manual (Page 2)

Edge Carry Transfer Conveyors
Standard Features:
Available Lengths: .5 & 1-Meter, 24” & Custom
Programmable Logic Controller
Variable Speed 10-45 fpm (3 – 13.7mpm) other speeds available
Operator controls (E-stop, Reset, Release, Audit/Bypass)
“Look-up” product sensor
Left to right travel, front fixed rail
ESD grounding receptacle
Aluminum frame with painted steel panels
Conforms to SMEMA Spec. 1.2 & NFPA 79
Includes 1 standard communications cable
Product Handling Capability:
Available Options
Custom Lengths & Widths
Steel Frame
Multiple Drive Sections
Various Belt & Chain Profiles
Thin board capability with No Dive
without PLC
abin ts
Workstations Packages
Light Tower & Audible Alarm
Cooling Hoods
Continuous run
Built in Storage & Tool C e
Custom Colors
Edge Contact:
0.187” (5mm) Others Available
Length: 3” – 20” (76mm - 508mm)
Width: 3” – 18” (76mm - 457mm)
Thickness: 0.045” (1.1mm) minimum
Weight: Up to 5 lbs (2.7kg) per foot
Above board clearance: N/A
Below board clearance: 0.5” (13mm)
Facilities Requirements:
Electrical: 115 VAC/15 amp
Air: N/A
Line height: 37” +/- 1” (940mm +/- 25.4mm)
with 6” above floor clearance for utility track
Footprint: XX” L x 34”W (XXL x 864mm W)
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com