DYNAPACE RFI/EMI Shielded Enclosure User Manual
Rfe 400 1m, Rfi shielded edge carry conveyor
RFE 400 1m
RFI Shielded Edge Carry Conveyor
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Standard Features:
Module:
RF Shielded Enclosure with Transfer Conveyor C17550
Length:
1 Meter (1000mm)
Frame Style:
Welded Steel Frame with painted panels
Description:
Single drive edge carry transfer conveyor
with an RF shielded enclosure designed
for In-line testing of RF emitting or sensitive PCBs
Radio Frequency Shielded Enclosure
(EMI/RFI shielding effectiveness >60db up to 6GHZ)
RF tight doors which automatically open & close to admit & release product
Internal Lift Plate (for customer provided test fixture)
Aux electrical compartment (for test fixture support electronics)
Front peripheral shelf & swivel monitor stand
RF filtered pass through connectors
Variable speed (10-45 fpm) (3 – 13.7mpm) Others available
Programmable Logic Controller
Hand crank width adjustment
Operator controls (E-Stop, Reset, Bypass)
“Look-up” product sensors
Light tower & audible alarm
Left to right travel, front fixed rail
Power outlet strip inside aux electrical compartment
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
0.187” (5mm) Others Available
Length:
3” – 20” (76mm - 508mm)
Width:
3” – 18” (76mm - 457mm)
Thickness:
0.045” (1.1mm) minimum
Weight:
Up to 5 lbs (2.7kg) per foot
Above board clearance: 1” (25.4mm)
Below board clearance:
0.5” (13mm)
Facilities Requirements:
Electrical:
115 VAC/15 amp
Air:
60 PSI 5CFM
Line height:
37” +/- 1” (940mm +/- 25.4mm)
with 6” above floor clearance for utility track
Footprint:
39.4”L x 36”W
(1000mm L x 914mm W)
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
082005