DYNAPACE Incline/Decline Wave Unload Transfer Conveyor User Manual
Edge carry incline/decline wave exit conveyor
WXE 418 / WXE 424
Edge Carry Incline/Decline Wave Exit Conveyor
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
WXE-418 / WXE-424 Edge Carry Incline/Decline Wave Exit
Frame Style:
Combination precision welded steel framing and painted sheet metal panels
Description:
The incline /decline wave exit conveyor is designed to accept product exiting from
a wave (at a specific height) and deliver the product to the next downstream
machine (at a specific lower height). The flat link chain - edge carry design offers
high temperature capabilities with reliable transfer. An optional cooling hood may
be attached that features fans located at both the top and sides. A row of cooling
fans may also be mounted below the rails to enhance the cooling effect.
Standard Features:
Continuous running flat link chain design
EDS safe / high temperature capable
Variable speed (1 - 12 fpm) (.30 – 3.66 mpm)
Hand crank width adjustment
Cooling Hood with On/ Off switch
Operator controls (E-stop, Reset)
Left to right travel
Designed for longevity with minimal maintenance
Wave exit (product entrance) height onto belt is (to be defined by customer)
Product exit (entrance into downstream machine) is 37 inches
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Product Handling Capability:
Edge Contact:
0.187” (5mm) Others Available
Length:
2” – 20” (51 – 508mm)
Width:
3.5” – 18” or 24” (89 – 457 or 609mm)
Thickness:
N/A
Weight:
Up to 10 lbs (4.54kg) per foot
Above board clearance:
2.0” (51mm)
Below board clearance:
1.0” (25.4mm)
Electrical:
115 VAC/60Hz 15 amp
Air:
N/A
Footprint:
Approx. 28”W by 90”L
(711mm W x 2286mm L)
Facilities Requirements:
Optional cooling hood shown
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
082005