DYNAPACE Heavy Duty Edge Carry Transfer User Manual
Hd edge carry transfer – 48”l - 2 zone
TCE 400 H48 2X
HD Edge Carry Transfer – 48”L - 2 Zone
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
TCE-400 H48 2X HD Edge Carry Transfer Conveyor
Length: 48”
(1219mm) edge carry rail design
Frame Style:
Precision welded framing with painted panels
Description:
Heavy-duty, 2-zone conveyor used to buffer or transfer up to two products, one in
each zone. Audit/bypass capability in second zone. Selection of “Single Mode”
allows conveyor to act as a one zone.
Standard Features:
Heavy-duty rails and motors for reliable transfer of large/heavy product.
Mode selector switch for single or dual transfer operation
Single mode operation transfers product up to 42” (1066mm)
Programmable Logic Controller
Variable speed (10-40 fpm) (3 – 12 mpm)
Hand crank for width adjust at both front and rear of machine
Operator controls (E-Stop, Reset, Release, Audit/Bypass)
“Look-up” product sensors
Audible alarm
Left to right travel, front fixed rail
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communications cable
Product Handling Capability:
Edge Contact:
0.125” (3mm)
Length:
3” – 42” (76 – 1067mm)
Width:
5” – 24” (127 – 609mm)
Thickness:
0.060” (1.524mm) minimum
Weight:
Up to 75 lbs (34 kg)
Above board clearance:
N/A
Below board clearance:
1.0” (51mm)
Facilities Requirements:
Electrical:
115 VAC/15 amp
Air:
N/A
Line height:
37” +/- 2” (940mm +/- 51mm)
with 6” above floor clearance for utility track
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
C17185 082005