DYNAPACE Accumulation Conveyors User Manual
Ace 400, Accumulation conveyor featuring polyacetal chain
ACE 400
Accumulation Conveyor
Featuring Polyacetal Chain
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
ACE-400 Polyacetal Chain Accumulation Conveyor C17176 or C17166
Frame Style:
Extruded aluminum framing
Description:
Intelligent edge carry conveyor that can be used as a linear buffer, and / or to
stage PCB's for sigulation to a downstream process.
Standard Features:
Available in 48” or 72” (1219mm or 1829mm) lengths
Pneumatic stop at exit to control product flow
Programmable Logic Controller
Low friction, flat link polyacetal chain
Variable speed (10-30 fpm) (3 – 9.1mpm)
Hand crank width adjustment
Operator controls (E-Stop, reset)
“Look up” product sensors
Left to right travel, front fixed rail
ESD grounding receptacles
Painted sheet metal panels
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
0.232” (5.9mm)
Length:
3” – 18” (76mm - 508mm)
Width:
3.5” – 18” (89mm - 457mm)
Thickness:
0.031” (.787mm) minimum
0.120” (3mm) maximum
Weight:
Up to 5 lbs (2.7kg) per foot
Above board clearance:
N/A
Below board clearance:
.50” (12.7mm)
Facilities Requirements:
Electrical:
115 VAC/60 Hz - 15 amp
Air:
60 PSI 5CFM
Line height:
37” +/- 1” (940mm +/- 25.4mm)
Footprint:
XX” L x 37”W (xx mm L x 940mm W)
3815 Ventura Drive
•
Arlington Heights, IL 60004
•
847-398-5757
•
Sales Fax 847-255-5257
•
www.dynapace.com
C17166 082005