DoorKing Remote Account Manager - Manual (Page 55)

4.3.2 Assigning Elevator Reference to Residents
After the Elevator Reference Table is complete, an elevator reference number must be assigned to each resident
using the elevator control feature. This is set on the Resident Information Screen.
1. On the Resident Information Screen, click the resident that you are going to set an Elevator
Reference (ER) number for.
2. Enter the Elevator Reference number and press ENTER. NOTE: You should also enter the floor
number in the FL field that the resident lives on if you have not done so already.
3. Repeat steps 1 and 2 to set the ER for other the other residents.
Figure 50
1835-066-N-7-13 Page 55