Diamond Products FZ-4S - Manual (Page 33)

FZ-4S Disassembling saw blade unit
FZ-4S_e_0205.fm Page 33
'LVDVVHPEOLQJ VDZ EODGH XQLW
&RUUHFWO\ GLVDVVHPEOH VDZ EODGH
z Turn marking (A) on the blade flange to the
safe removal position.
(In the wrong position the saw blade may
come lose and drop off)
/RRVHQLQJ FHQWUDO VFUHZ
z Fully loosen central screw
Always switch off the drive unit
and relieve the pressure in the
hoses before handling the wall
saw
Only when the marking (A) of the blade
flange is in the correct position can the saw
blade be correctly removed from the wall
saw.
A
The central screw has been correctly
loosened if a “click” is heard and the central
screw pops out by a few millimetres.
CLICK