Diamond Products FZ-4S - Manual (Page 24)

Saw blade unit for normal cutting FZ-4S
Page 24 FZ-4S_e_0205.fm
6DZ EODGH XQLW IRU QRUPDO FXWWLQJ
6DZ EODGHV RI XS WR PP
GLDPHWUH
$VVHPEO\
z Place saw blade (E) with a 60 dia. hole on
the blade flange (A)
z Saw blade alignment:
Countersinkings against blade cover (B)
z Screw down blade cover (B) with 2 hexagon
head cap screws (C) onto the blade flange
(A).
If the quick release flange is not properly secure, it may come loose and cause serious
injury. It is therefore essential to closely follow the instructions below.
C
C
A
A
E
B
B
E
!
Secure saw blades of up to 1000 mm dia.
with a blade cover (B) and 2 hexagon head
cap screws (C)!
Use the following screws only:
Hexagon head cap screw M12x35,
order no. 969911