Diamond Products HCH50 - Manual (Page 58)

Taking out of service and storage Operating instructions
9-2 HCH5011 / 001
9.2.2 Personnel qualifications
The Chain saw HCH5011 should not be taken out of service by
unauthorised persons. Personnel are only authorised where they meet the
following requirements.
• Have completed concrete expert training or professional experience.
• Have received an introduction (basic training) to the operation of the
Chain saw HCH5011 from a service engineer.
Have read and understood chapter 2 “Safety instructions”.
9.3 Storage
Some components of the Chain saw HCH5011 consist of materials which
may corrode. If unused for lengthy periods, take the following action:
• Blow the water out of the water lines
• Lightly oil the apparatus
• Store in a dry location