Diamond Products HCH50 - Manual (Page 21)

Operating instructions Safety instructions
HCH5011 / 001 2-7
2.6 Responsibility
2.6.1 Authorised personnel
Work on or with TYROLIT Hydrostress AG machines or systems should
only be performed by authorised personnel. Personnel are considered by
TYROLIT Hydrostress AG to be authorised if they meet the necessary
training and know-how requirements and they have been assigned a
precise functional role.
The personnel qualifications for the corresponding work are contained in
the introduction under “General” of the respective chapters.
2.6.2 The manufacturer
TYROLIT Hydrostress AG or a company expressly nominated by
TYROLIT Hydrostress AG is deemed to be the manufacturer of the
products supplied by TYROLIT Hydrostress AG. Within the context of an
integrated quality and safety control system the manufacturer is entitled to
request from the operator information on the products.
2.6.3 Operator
The operator named by TYROLIT Hydrostress AG is the primary, legal
entity responsible for the correct use of the product and for the training and
use of the authorised personnel. The operator sets out the mandatory skills
and level of training of the authorised personnel for his company.
2.6.4 Operative (user)
User is the term employed by TYROLIT Hydrostress AG to designate a
person who independently performs the following work:
• Sets up TYROLIT Hydrostress AG machines or systems for tasks
according to the intended purpose.
• Performs tasks independently and monitors these.
• Locates malfunctions and initiates or performs troubleshooting.
• Carries out servicing and simple maintenance.
• Observes the correction functioning of the safety devices.
2.6.5 Service engineers
Service engineer is a term used by TYROLIT Hydrostress AG to
designate a person who independently performs the following work:
• Installs TYROLIT Hydrostress AG machines and systems and controls
their correct application.
• Makes adjustments to machines and system for which special access
rights are required.
• Performs repairs, complex service work and corrective work.