Diamond Products HCH50 - Manual (Page 45)

Operating instructions Maintenance
HCH5011 / 001 7-1
7 Maintenance
7.1 General
Before proceeding read Chapter 2 «Safety instructions», 2-1 in these
Operating instructions. Be sure also to take note of all the danger
information given here and follow the instructions on how to avoid physical
injury and damage to property.
7.1.1 Safety instructions
It is essential to observe the following safety instructions, in particular in
relation to the maintenance of the HCH5011.
Danger
Danger of falling heavy parts.
When performing the types of work described in this chapter, it is
essential to wear the following individual protective equipment:
helmet, goggles, protective gloves and safety shoes (see “Chapter
2” 2.3.7,
2-4).
It is essential that the work instructions and procedures described
in this safety manual are followed.
Failure to observe this regulation may lead to serious physical
injury, and possibly even death, and to property damage.
Danger
Danger from segments flying off from the tool.
In no event should diamond chains have new segments fitted by
unauthorised operators.
Failure to observe this regulation may lead to serious physical
injury, and possibly even death, and to property damage.
Warning
Danger from uncontrolled movements of the HCH5011!
Never connect or disconnect hoses when the unit is running.
Failure to adhere to this regulation may result in cut wounds or
injury to body parts and damage to property.