Diamond Products HCH50 - Manual (Page 17)

Operating instructions Safety instructions
HCH5011 / 001 2-3
2.3 General safety rules
2.3.1 Statutory provisions
The generally applicable national and local safety and accident prevention
provisions and the supplementary operator regulations must be followed
and complied with.
2.3.2 Inspection and maintenance obligation
The operator is under an obligation to only use the Chain saw HCH5011
when it is in a perfect and undamaged condition. The maintenance
intervals shown in the Operating instructions must be adhered to without
fail. Malfunctions and mechanical damage must be rectified without delay.
2.3.3 Spare parts
Only TYROLIT Hydrostress AG original spare parts should be used.
Otherwise damage may be caused to the Chain saw HCH5011 or to other
property and persons.
2.3.4 Power connections
The Chain saw HCH5011 must be connected and coupled to the drive
assembly used in accordance with the Operating instructions.
2.3.5 Modifications
No technical alterations should be made to the apparatus in the form of
additions or conversions without the written consent of TYROLIT
Hydrostress AG.
2.3.6 Safety instructions in the individual chapters
The chapters of these Operating instructions contain additional safety
instructions. These make reference to specific potential dangers (residual
dangers). The instructions must be followed closely and require that the
actions described are taken.