Diamond Products HCH50 - Manual (Page 47)

Operating instructions Maintenance
HCH5011 / 001 7-3
7.2 Maintenance and servicing table
The following maintenance work must be performed according to the
prescribed cycles. Wear parts that are not subject to particular
maintenance intervals should also be checked regularly for wear and
adjusted or exchanged as necessary.
Maintain the system within the indicated intervals in order to ensure:
• Safety for the operator
• Optimum performance
• Optimum reliability at all times
befor
e ea
ch
st
ar
t-
u
p
upo
n comp
letion of wor
k
we
ek
ly
ann
ua
lly
in th
e even
t of malfu
n
ctio
n
in th
e even
t of da
mag
e
Hydraulic system Hydraulic hose inspection
(Tightness / cleanliness)
X X X X
Coupling inspection
(Tightness / cleanliness)
X X X X
Water economy Water line
(Tightness / cleanliness)
X X X X
Blow out water (frost hazard) X
Chain saw unit Tightness / cleanliness X X
Retighten accessible screws and nuts X X
Bar Water cleaning X
Lubrication X X
Check for wear X X X X
Diamond chain Water cleaning X
Lubrication X X
Chain tension X
Check for wear X X X X
Major service May only be carried out by TYROLIT
Hydrostress AG or an authorized
representative
X