Luminex xPONENT 4.0 SP1 - Manual (Page 36)

Luminex xPONENT 4.0 Software Manual
24
• Expiration
• Manufacturer
Save. Saves the information as a pending batch.
Cancel. Returns to the Batches tab.
Back. Returns to the previous window.
Run Batch. Runs the batch and opens the Current Batch tab, where you can monitor the
batch as it runs.
Create a New Batch From a New Protocol
Click Create a New Batch from a new Protocol to create a new batch without using a
protocol. The Settings tab opens. Raw data results write to a.CSV file. You can define
parameters for samples, gates, regions, events, and commands.
NOTE: If the batch spans more than one plate, the tray ejects
automatically when all defined wells have been acquired. A dialog
box displays prompting you to insert the next plate.
Settings Tab
Use this tab to name your new batch and configure acquisition settings.
FIGURE 13. Settings Tab
This tab contains the following: