beautypg.com

Adjusting drum low limit – Magnum Venus Plastech PUTTY UNIT User Manual

Page 29

background image

Putty Unit Operations Manual

Rev. 07/2012

Page | 29

Adjusting Drum Low Limit:


1. To set the low level limit loosen the bolt holding the shaft collar in place.

2. Slide the shaft collar to the desired position on the post and tighten the bolt back down. (see figure 52)

Fig. 52

Note: The valve (09321) for the ADP-1010 turns off the air supply to the air motor valve thus
stopping the pump.

















Loosen the bolt holding the
collar and slide the collar to
the desired location