Magnum Venus Plastech PUTTY UNIT - Manual (Page 20)

Putty Unit Operations Manual
Rev. 07/2012 Page | 20
Priming Putty Pump:
1. Fill solvent cups with throat seal liquid (see Fig. 16)
Fig. 16
2. Open the Ball Valve off the regulator and gauge marked Airlift cylinder (see figure 18).
3. Open ram control lever to “up” position (see Fig. 17)
Fig. 17
4.
Slowly turn up Ram Pressure Regulator (marked AIR LIFT) to 10 -20 psi (see figure 18)
Fig. 18