Magnum Venus Plastech PATRIOT CHOP CHECK IMP-PAT-CCP-MP-5 - Manual (Page 19)

Patriot Putty Unit Operations Manual
Rev. 08/2012 Page | 19
Hose Connections:
5. Connect the Resin Hose from the Pump Outlet to the Accumulator (see fig. 4b)
6. Attach Flush Tube (solvent to the gun) to the outlet (SOLVENT) side of the flush tank (see fig. 5)
7. Attach ¼ inch poly air hose from the air manifold to the flush tank regulator (AIR). (see fig. 5)
8. Connect the Resin Hose from the gun to the outlet side of the Accumulator. (see fig. 5)
Fig. 5
9. Install the Catalyst Jug into the Catalyst Jug Bracket. (see fig. 6)
Fig. 6