beautypg.com

Unit requirements & assembly, Air requirements, Assemble the unit – Magnum Venus Plastech PATRIOT CHOP CHECK IMP-PAT-CCP-MP-5 User Manual

Page 17

background image

Patriot Putty Unit Operations Manual

Rev. 08/2012

Page | 17

Unit Requirements & Assembly:

Please make sure all appropriate personal protective equipment is used before start up of this unit. Refer
to and follow the requirements of the Material Safety Data Sheets supplied by your coating material
manufacturer for solvent, adhesive and activator.

CAUTION: Always wear proper safety equipment (glasses, gloves, respirator, etc.) when working
on the dispensing equipment.

Air Requirements:


1.

The system requires a supply of air (30cfm) and at least 100 psi.

2.

We require a 1/2" inch (12-13mm) inside diameter air hose minimum (Use caution when using quick
disconnects as they may restrict air flow.

3.

Preferably the air will be clean, dry and oil free.

Assemble the unit:


1. Attach the Catalyst Jug Bracket and Catalyst Manifold to the upper support bar (see figure 1)






Fig. 1