Magnum Venus Plastech Flex Molding Process IVX3 INJECTION VALVE 8010 - Manual (Page 20)

IVx3 Injection Valve Manual
Rev. 03/2012 Page | 20
Fluid Valve Repair:
NOTE: It is important to have the correct parts drawing for the item you are
working on. This will assist in identifying the correct part numbers for the
assembly being rebuilt.

IVX3 Spares Kit (8011)

IVX3 Tool Kit (8012)

Flat Tip Screw Driver for 7057

Flat Tip Screw Driver for 7055

Red Grease (6706-2-1 1oz)
The IVX3 Tool Kit (8012) comprises of two specialized tools, IVX3 Tool A and IVX3 Tool
B. These tools are required for the correct maintenance of the valve.
Hard Wearing Seal Quick Change:
1. Apply air to the actuator to move the valve to the Inject position.
2. Remove the two (2) Machine Screws (7057) from the bottom of the valve.
3. Carefully remove the Lower Valve Body (6986) from the Upper Valve Body (6985).
Use band to keep tools together for storage.
Tool A
Tool B
Spanner for shaft flats
Screwdriver for actuator bushes
Ring spanner for cylinder cap