Magnum Venus Plastech UltraMAX VLS-2400 Series - Manual (Page 22)

VLS-2400 Series Fluid Section Manual
Rev. 08/2013 Page | 22
WEEKLY MAINTENANCE CHECKLIST:
PART PROCEDURE
Ai r Filter (“Water Trap”) Drain
Hoses Check for kinks or leaks.
Gauges and Regulators Check for damage and proper operation.
Accumulator Remove and clean inside. Danger: Never attempt to
remove an accumulator until you have relieved
pressure. See
Accumulator & Filter section pg. 31.
Filter Clean and inspect filter screen for plugging. Note:
Clean the screen weekly and when changing from
one material to another. Use proper screen mesh
size according to the material being used.
Fluid Section Check the oil reservoir and add oil if needed. If
necessary, clean and dry the silencers. Check the
pickup hose and wand for leaks and damage. Check
for packing leaks.
Air Lines Check for leaks, wear and kinks. Replace if necessary.
MONTHLY MAINTENANCE CHECKLIST:
PART PROCEDURE
Ai r Filter (“Water Trap”) Drain.
Hoses Check for kinks or leaks.
Gauges and Regulators Check for damage and proper operation.
Accumulator Remove and clean inside. Danger: Never attempt to
remove an accumulator until you have relieved
pressure. See Accumulator & Filter section pg. 31.
Filter Clean and inspect filter screen for plugging. Note:
Clean the screen weekly and when changing from
one material to another. Use proper screen mesh
size according to the material being used.
Fluid Section Check the oil reservoir and add oil if needed. If
necessary, clean and dry the silencers. Check the
pickup hose and wand for leaks and damage. Check
for packing leaks.
Catalyst Jug Check and clean tubes and filter screens if necessary.
Danger: Fire and explosion hazard. Never allow solvent
or grease to contact any part of the catalyst system.
Air Lines Check for leaks, wear and kinks. Replace if necessary.