Magnum Venus Plastech UltraMAX VLS-2400 Series - Manual (Page 15)

VLS-2400 Series Fluid Section Manual
Rev. 08/2013 Page | 15
Introduction:
This manual, the VLS-2400 FLUID SECTION MANUAL, provides information you need to
perform simple maintenance and repair on your equipment.
 Step-by-step assembly and disassembly procedures are included for each component.
 A troubleshooting guide helps you diagnose and perform common repair situations.
 A comprehensive maintenance schedule provides a detailed list for performing daily,
weekly, monthly, three-month and annual maintenance.
Please read the manual carefully. Follow the steps in the order given, otherwise you may
damage the equipment or injure yourself.
DANGER: Always wear proper safety equipment, including eye protection and gloves
when performing service and repair on this equipment.
This manual covers the following pump assemblies:
VLS-2400
Fluid Section Assembly
VLS-2400-GRAN Fluid Section Assembly – Granite Coat
VLS-2400-MP Fluid Section Assembly
– Magnapak
DLS-2400 Fluid Section Assembly – Duo Unit
MCPA-2500 Fluid Section Assembly – Multi Color units
VLS-2440-CK
Fluid Section Conversion Kit - Magnapak
During Disassembly:
As you disassemble the equipment, lay out the components in the correct order and direction.
This will help you to reassemble them.
Note: the order of the piston cup, piston cup spacer ring, piston cup backup ring and
compression ring and the directions they face. These directions are critical to proper
functioning of this equipment.