Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 97)

A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 A S U S R S 1 2 0 - E 3 / P A 4 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1 5 - 3 1
The Thermal Active Temperature Thermal Active Temperature Thermal Active Temperature Thermal Active Temperature Thermal Active Temperature and Thermal Slow Clock Ratio Thermal Slow Clock Ratio Thermal Slow Clock Ratio Thermal Slow Clock Ratio Thermal Slow Clock Ratio
items appear only when the System Thermal System Thermal System Thermal System Thermal System Thermal item is set to Enabled.
Thermal Active Temperature [60ºC/140ºF] Thermal Active Temperature [60ºC/140ºF] Thermal Active Temperature [60ºC/140ºF] Thermal Active Temperature [60ºC/140ºF] Thermal Active Temperature [60ºC/140ºF]
Allows you to specify the system thermal control activating temperature.
Configuration options: [40ºC/104ºF] [45ºC/1113ºF] [50ºC/122ºF]
[55ºC/131ºF] [60ºC/140ºF] [65ºC/149ºF] [70ºC/158ºF] [75ºC/167ºF]
Thermal Slow Clock Ratio [50%] Thermal Slow Clock Ratio [50%] Thermal Slow Clock Ratio [50%] Thermal Slow Clock Ratio [50%] Thermal Slow Clock Ratio [50%]
Allows you to select the duty cycle in throttle when a thermal override condition
occurs. Configuration options: [87.5%] [75.0%] [62.5%] [50%] [37.5%]
[25%] [12.5%]
Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state, whatever
the system state was before the AC power loss. Configuration options: [Power
Off] [Power On] [Last State]
Resume On Ring [Disabled] Resume On Ring [Disabled] Resume On Ring [Disabled] Resume On Ring [Disabled] Resume On Ring [Disabled]
When set to [Enabled], the system enables the RI to generate a wake event
while the computer is in Soft-off mode. Configuration options: [Disabled]
[Enabled]
Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled]
When set to [Enabled], the system enables the LAN to generate a wake
event while the computer is in Soft-off mode. Configuration options: [Disabled]
[Enabled]
Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake
event while the computer is in Soft-off mode. Configuration options: [Disabled]
[Enabled]
Resume On RTC Alarm [Disabled] Resume On RTC Alarm [Disabled] Resume On RTC Alarm [Disabled] Resume On RTC Alarm [Disabled] Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. Configuration
options: [Disabled] [Enabled]