Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 148)

6 - 4 2 6 - 4 2 6 - 4 2 6 - 4 2 6 - 4 2 C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
6.6 Setting the Boot array use MB BIOS
Setup Utility
1. When creating multi-raid via Intel(r) Matrix Storage Manager RAID, we
would like to assign one array to be the boot drive. The following shows
as the status of current arrays:
2. Re-boot the system and press to enter the Motherboard BIOS
Setup Utility during POST.
3. Go to [Boot] menu —> [Boot Device Priority]. Then, select the desired
boot array and use <+> or <-> key to change the boot device priority.
4. Exit the BIOS Setup Utility and save the changes.