Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 44)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 2 8 2 - 2 8 2 - 2 8 2 - 2 8 2 - 2 8
To reinstall the motherboard:
1. Firmly hold the motherboard by
the sides and insert it into the
chassis as shown.
2. Carefully adjust the motherboard
until the rear panel ports fit in
place.
3. Use a Phillips (cross) screwdriver
to secure the motherboard with
ten (10) screws in the holes as
shown in the illustration in the
previous section.
4. Reconnect all the required cables
to the motherboard. See section
“2.6 Cable connections” for
details.
5. Reinstall all the devices that you
have previously removed.