Asus 1U Rackmount Barebone Server RS120-E3 (PA4) - Manual (Page 71)

A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) A S U S R S 1 2 0 - E 3 ( P A 2 ) 5 - 5 5 - 5 5 - 5 5 - 5 5 - 5
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
A:\>afudos /iP5MTR.ROM
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
WARNING!! Do not turn off power during flash BIOS
Reading file ....... done
Reading flash ...... done
Advance Check ......
Erasing flash ...... done
Writing flash ...... done
Verifying flash .... done
Please restart your computer
A:\>
Updating the BIOS file using a USB flash drive Updating the BIOS file using a USB flash drive Updating the BIOS file using a USB flash drive Updating the BIOS file using a USB flash drive Updating the BIOS file using a USB flash drive
If you have not purchased a USB floppy disk drive, you may update the BIOS
file using a USB flash drive. Format the USB flash drive to FAT16 or 32 system
file before updating the BIOS.
To format the USB flash drive to a FAT32/16 system file:
1. Insert the USB flash drive to an available USB port.
2. From the Windows desktop, click S t a r t S t a r t S t a r t S t a r t S t a r t, then select M y C o m p u t e r M y C o m p u t e r M y C o m p u t e r M y C o m p u t e r M y C o m p u t e r.
3. Right-click the USB flash drive icon, then select F o r m a t F o r m a t F o r m a t F o r m a t F o r m a t from the menu.
4. From the F i l e s y s t e m F i l e s y s t e m F i l e s y s t e m F i l e s y s t e m F i l e s y s t e m field, select F A T 3 2 F A T 3 2 F A T 3 2 F A T 3 2 F A T 3 2 or F A T 1 6 F A T 1 6 F A T 1 6 F A T 1 6 F A T 1 6, then click the
S t a r t S t a r t S t a r t S t a r t S t a r t button.
To update the BIOS file:
1. Copy the original or the latest BIOS file and the AFUDOS utility
(afudos.exe) to the USB flash drive.
2. Insert the USB flash drive to an available USB port, then place the
motherboard support CD to the optical drive.
3. Boot the system from the support CD, then select the F r e e D O S F r e e D O S F r e e D O S F r e e D O S F r e e D O S
c o m m a n d p r o m p t c o m m a n d p r o m p t c o m m a n d p r o m p t c o m m a n d p r o m p t c o m m a n d p r o m p t.
4. At the DOS prompt, replace the prompt with the USB flash disk drive
letter, then type: afudos /i[filename].
3. Follow the instructions in the previous section to update the BIOS file.