Matrix storage manager – Asus 1U Rackmount Barebone Server RS120-E3 (PA4) User Manual
Page 144
6 - 3 8
6 - 3 8
6 - 3 8
6 - 3 8
6 - 3 8
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
6.3.7
6.3.7
6.3.7
6.3.7
6.3.7
Exiting the Intel
Exiting the Intel
Exiting the Intel
Exiting the Intel
Exiting the Intel
®
®
®
®
®
Matrix Storage Manager
Matrix Storage Manager
Matrix Storage Manager
Matrix Storage Manager
Matrix Storage Manager
To exit the utility:
1.
From the utility main menu, select 4 . E x i t
4 . E x i t
4 . E x i t
4 . E x i t
4 . E x i t, then press
This window appears.
Are you sure you want to exit? (Y/N):
[
CONFIRM EXIT
]
2.
Press
6.3.6
6.3.6
6.3.6
6.3.6
6.3.6
Resetting disks to Non-RAID
Resetting disks to Non-RAID
Resetting disks to Non-RAID
Resetting disks to Non-RAID
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure
on the drive.
To reset a RAID set hard disk drive:
1.
From the utility main menu, select 3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D
3 . R e s e t D i s k s t o N o n - R A I D,
then press
2.
Use the up/down arrow key to highlight the RAID set drive you want to
reset, then press
3.
Press
4.
Press
5.
Follow steps 2 to 4 to select and reset other RAID set drives.
[
RESET RAID DATA
]
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be
lost.
Port
Drive Model
Serial #
Size
Status
0
XXXXXXXXXXXX
XXXXXXXX
XX.XGB Member Disk
1
XXXXXXXXXXXX
XXXXXXXX
XX.XGB Member Disk
Select the disks that should be reset.
[
↑
↑
↑
↑
↑↓
↓
↓
↓
↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete